48 ft Air-Ride, Swing-Door

Single-Temp Reefer
Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.


Equipment Specifications

Inside Dimensions Metric Imperial
Overall Length 14.63 m 48'
Overall Width 2,591 mm 102''
Overall Frame Width 2,591 mm 102''
Overall Height 4,115 mm 13' 6''
Coupler Height 1,194 mm 47''
Kingpin Setting 914 mm 36''
Dock Height 15,558 mm 51' 1/2''
Inside Width (at liner) 29,578 mm 97' 1/2''
Inside Height 31,407 mm 103' 1/2''
Cubic Capacity 92.09 m3 3,252 ft3
Weight (+/- 3%) 6,895 kg 15,200 lbs
Width (in) 28,972 mm 95' 5/8''
Height (in) 2,591 mm 102''
Suspension Full slide range, variable-position tandem axles with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8" axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25" x 22.5" steel hub-piloted wheels
Brakes 16-1/2" x 7" x 3/4" s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Refrigeration Unit THERMO KING SBIII Smart Reefer
Fuel Tank 50 gallon aluminum fuel tank
Upper Coupler AAR certified coupler with 1/4" pick-up and 5th-wheel plates. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4" steel I-beam crossmembers on 12" centers over bogie and landing gear, with additional crossmembers at rear on 8" centers. Aluminum I-beams on 12" centers in bay-area of trailer, aluminum inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Aluminum z-posts on 24" centers, 12" centers from landing gear forward
Insulation Polyurethane - 2-1/2" in floor, 2" in sides,3" in roof
Floor 1-1/4" heavy-duty duct aluminum floor with forklift reinforcement package at rear
Scuff 12" aluminum scuff, integral with floor
Return Air Bulkhead Half height bulkhead with pallet stops
Rear Frame Stainless steel unitized construction, gusseted to body rails
Rear Doors 3" insulated swing-doors with fiberglass inner-lining, internal lower door reinforcement, and aluminum scuff. 5 hinges and 1 locking-rod per door
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Stationary gladhands mounted on roadside

Get A Quote

"*" indicates required fields

This field is for validation purposes and should be left unchanged.