dry vans

Plate Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

Suspension

Full slide range, variable-position tridem axles with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles

5/8" axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires

295/75R 22.5 premium radial tires
Wheels

2 sensor / 1 modulator-valve system
Upper Coupler

AAR certified coupler with 1/4" pick-up plate and 5/16" 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers

4" steel I-beam crossmembers on 12" centers with additional crossmembers at rear on 8" centers. Inverted-hat crossmembers from landing gear forward
Landing Gear

AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts

Aluminum "A" slotted logistics posts, 5 additional sidewall stiffeners per side
Roof

One piece aluminum roof
Floor

1-3/8" laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff

6" aluminum scuff, integral with bottom rail. 12" Flat Steel Plate in nose of trailer
Rear Doors

3/4" plymetal construction swing-doors, with 5 hinges and 2 locking-rods per door
Lights & Wiring

Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections

7-way ATA plug with no circuit breakers
Air Connections

Swivel gladhands mounted on roadside